Renedra

Afghanistan To Middle East Two-Storey Houses

Afghanistan To Middle East Two-Storey Houses 1/56th scale hard plastic made for 28mm gaming. Box contains 9 frames needed to make one of each size Afghanistan To Middle East Two-Storey House. (Building 1: 130mm high, Building 2: 115mm high & Building...

Railings with Gate

The pack consists of 2 frames – each frame contains 4 lengths of railings, 1 gate pillar and 1 gate making 81cms of railings (including the gate). Models supplied unassembled and unpainted. Figures not included.  

Railings (no gate)

3 railings per frame and 4 frames in a pack making approximately 100cm of railings. No gates in this pack. Models supplied unassembled and unpainted. Figures not included.  

Worm Fences

Worm Fences, 2 Frames per pack. Models supplied unassembled and unpainted. Figures not included.  

Palisade Fence

2 Frames per bag, each with 4 x 75mm lengths plus 5 posts. Total length 600mm. Models supplied unassembled and unpainted. Figures not included.  

Picket Fenceing

This is a 28mm Scale kit of a Picket fence designed by Tim Adcock and manufactured by Renedra. The fence pieces are approximately 6cms long and 2.2cms tall. These are ideal accessories for the serious military modeller and is great for adding detail to...

Five Bar Fence

This is a 28mm Scale kit of a 5 bar fence designed by Tim Adcock and manufactured by Renedra. The fence pieces are approximately 8cms long and 2.5cms tall. These are ideal accessories for the serious military modeller and is great for adding detail to...

Cross & Rail Fencing with Stone Bases

28mm fencing.Each pack contains 2 frames of Cross & Rail fencing plus 1 frame of Stone Bases to enable the construction of a 46cm length of fencing. The pack also contains 92 individual stones for customisation. Models supplied unassembled and...

Sandbags - SANDBAG

28mm sandbag emplacements.Hard plastic sandbags for 19th/ 20th and 21st Century battlefields. Lots of individual 'bags' to fashion your own emplacements. Models supplied unassembled and unpainted. Figures not included.  

Plastic Tents

One frame of Plastic tents for 28mm sized figures. Each frame contains two of each type of tent (one open and one closed), plus a couple of stretchers/camp beds and a camp fire. Models supplied unassembled and unpainted. Figures not included.  

Saxon Tents

One frame of Plastic tents for 28mm sized figures. 4 Tents - 2 Open Tents, 2 Closed. Models supplied unassembled and unpainted. Figures not included.  

Ridge Tent Set

4 Tents, 1 Camp fire, 2 pieces of Camp Furniture. Models supplied unassembled and unpainted. Figures not included.  

Shipping Container & 8 Pallets (40FT)

1/56 Scale 1x 40ft Shipping Container & 8 x Pallets. The kit consists of 4 frames ; Back & Doors , 2 x Side wall & Top or bottom , 1 Frame 8 x pallets. Models supplied unassembled and unpainted. Figures not included.  

Shipping Containers & Pallets (20FT)

1/56 Scale 2x Shipping Containers & 4 x Pallets (20FT). The kit consists of 3 frames per Container ; Side walls ,Top and bottom Including 2x pallets and Back & Doors. Models supplied unassembled and unpainted. Figures not included.  

Oil Drums x8

1/56 Scale Frame of 8 x Oil Drums. The kit consists of 1 frames to make 8 x Oil Drums. The Houses come unassembled and unpainted. Figures not included.  

Wood Pontoon Bridge

An excellent kit to represent a pontoon bridge typical of those used in all theaters of war from the 1700’s up to World War 2. A single kit builds a bridge 8″ long by 2″ wide. Easily combined to make a longer span. Assembly required...

Gabions (double pack)

Two frames, 10 gabions per frame. Suitable for 28mm sized models, supplied unpainted. Models supplied unassembled and unpainted. Figures not included.  

Chevaux de Frise

Pack consists of two frames. Each frame has enough mouldings to construct 3 x 55mm and 2 x 30mm sections. Each pack gives a total length of 450mm. Each Cheval de Frise is a two part tapered push fit assembly (but can be glued if required). Models...

Bell Tents

One frame of Plastic tents for 28mm sized figures. 4 Tents, 1 Camp fire, 2 pieces of Camp Furniture. The Houses come unassembled and unpainted. Figures not included.  

Large Barrels - BARRELS3

5 Barrels per pack. Approximately 15mm High x 15mm Diameter. Available in Grey only. The Houses come unassembled and unpainted. Figures not included.  

Mixed Barrels - BARRELS

5 large & 5 small per bag. The Houses come unassembled and unpainted. Figures not included.  

Small Barrels - BARRELS2

5 Small Barrels per pack Approximately 10mm High x 10mm Diameter Available in grey only The Houses come unassembled and unpainted. Figures not included.  

Renedra Wall Section

The Wall Section comes in kit form, unassembled and unpainted. Box contents: 5 Frames consisting of, 2 x Frames of Wall (front and rear)1 x Frame of Crenellations which includes two small doors for customisation2 x Frames each consisting of supports and...

Renedra Tower

The Tower comes in kit form, unassembled and unpainted. Box contents: 12 Frames consisting of, 4 x Frames with Cross Bow Slits to build the lower levels2 x Window frames2 x Stone effect bases2 x Frames of Crenellations, Gargoyles and Wall Torches2 x...

Ramshackle Church

1/56th scale hard plastic made for 28mm gaming. The Church comes in kit form, unassembled and unpainted. The kit consists of Four frames to construct the roof, side walls and Spire an Instruction Leaflet is also included. The Houses come unassembled and...

Timber Cabin 28mm

1/56th scale hard plastic made for 28mm gaming. There are 3 frames in each pack, Two frames contains the roof part and Side Wall and the other the Front and Back wall sections. The building measures L 131mm x W 90mm x  H 65mm (Apex of roof) Assembly...

Viking House 28mm - RNVH-1

Makes one 1/56th scale hard plastic made for 28mm gaming. There are 3 frames in each pack, Two frames contains the roof parts and Accessories and the other the Front and Back walls sections. The building measures 92mm x 77mm x 80mm  Assembly and...

Timber Outbuilding 28mm

1/56th scale hard plastic made for 28mm gaming. There are 2 frames in each pack, one frame contains the roof parts and the other the side walls and front. Assembly and painting required (figures shown in picture not included)

Wattle/Timber Outbuilding 28mm

1/56th scale hard plastic made for 28mm gaming. There are 2 frames in each pack, one frame contains the roof parts and the other the side walls and front. The building measures 104mm x 67mm x 59mm  Assembly and painting required (figures shown...

Wattle & Daub Outbuilding 28mm

1/56th scale hard plastic made for 28mm gaming. There are 2 frames in each pack, one frame contains the roof parts and the other the side walls and front. The building measures 104mm x 67mm x 59mm  Assembly and painting required (figures shown...

Stone Thatched Outbuilding 28mm

1/56th scale hard plastic made for 28mm gaming. There are 2 frames in each pack, one frame contains the roof parts and the other the side walls and front. The building measures 104mm x 67mm x 59mm  Assembly and painting required (figures shown...

Log Cabin 28mm

1/56th scale hard plastic made for 28mm gaming. There are 3 frames in each pack, Two frames contains the roof part and Side Wall and the other the Front and Back wall sections. The building measures L 131mm x W 90mm x  H 65mm (Apex of roof) Assembly...